[1000mp] No Power Out

Sat, 22 Mar 2003 00:06:19 -0500

Hi Dennis,  I think your problem might be the coaxial jumper cable that
connects the IF/Filter board to the Inrad board.  I don't have my schematics
handy right now, but I believe that with
the radio upside down and the front panel facing you, the cable I'm thinking
of comes from the
lower left corner of the IF /Filter board and connects to the Inrad board.
There are two PCB
RF connectors right there but only one is the right one.  The other one is
unused except during alignment.  Double check and see if the coaxial cable
to the Inrad board didn't end up in the wrong jack.  Maybe someone with
schematics can tell you which J???? to use.
Good Luck,
Ed
W2UV

----- Original Message -----
From: "Dennis" <[email protected]>
To: <[email protected]>
Sent: Friday, March 21, 2003 10:36 PM
Subject: [1000mp] No Power Out

Well I just got the rig back together after doing the INRAD Key Click mod,
Noise Reduction mod and the W8JI IMD mod and I now have no power out in any
mode.  Any ideas as to where to start looking?  The MARK-V does to into
transmit in both CW and SSB but no power out.

SIGH,

Dennis AB8NI

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp