[1000mp] 1000mp memories

[Jim Smith]

If you're interested in a very nice program which enables you to monitor 
all the NCDXF beacons on all the bands (20 to 10 incl WARC bands), 
display their signal strengths, switch the radio from band to band, etc. 
you might want to check out BeaconSee at 
http://www.ip.pt/coaa/software.htm.  You can start it running, walk 
away, come back in half an hour or so, look at the monitor and see which 
band is open to where.  Real slick.  Of course, after you have used it 
for a while you will want to buy a multi-band vertical to get an 
omni-directional receive pattern.

Hope this is of some interest.

73 de Jim Smith    VE7FO


Mike wrote:

>I find one of best uses for this is for the  IARU-NCDXF Beacon Freqs, one
>can then switch to each freq in turn to check on any particular beacon.
>Suppose you could use memory scan for this too, or I believe there's a PC
>program to track them, but I don't find it too hard to turn the memory knob!
>73 de Mike, zl1mh.
>
>_______________________________________________
>List Moderator: Richard Lubash N1VXW
>1000mp mailing list
>1000mp@mailman.qth.net
>To Change Options or Unsubscribe:
>http://mailman.qth.net/mailman/listinfo/1000mp
>