[1000mp] No Receiver 7.5 - 14.5 mhz

[John Tait]

Subject: [1000mp] No Receiver 7.5 - 14.5 mhz

Hi Tom..
               This one has come up before..

Sounds like your VCO 2 has stopped.. If you're lucky, it may
just need a " tweak"... If not, then a component has died..
Gimme a yell if I can be of help...
  BTW.. I've come across five other rigs with similar problems in the last
month..
                  73
                John EI7BA   http://www.iol.ie/~bravo/


> I have a problem that just started on my MP. I have no received signal
from
> 7.5 to 14.5 mhz on the main receiver. I can receive signals on the second
> receiver. I get zero power output if I try to transmit on 20 or 30 meters.
> If I try split operation I also get no transmitted signal.
>
> As I tune from just below 7.5 the rx goes from working to not working and
as
> I tune from just below 14.5 to above the receiver comes to life. I can
> always hear some background noise but no signal in the 7.5 - 14.5 range.
>
> Any one have a suggestion where to look first? I didn't see anything quite
> like this in the archives that I reveiwed.
>
> 73, Tom, W1TO
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> 1000mp@mailman.qth.net
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>