Re[2]: [1000mp] FT1000MP Key Clicks on first element DO Matter

[Serge UT2IO]

Hello Earl.

Thursday, January 2, 2003, 7:21:55 AM, you wrote:

kjc> If you tune outside of the receiver's passband where you can no longer
kjc> hear the CW signal but you hear clicks, the transmitted signal has
kjc> clicks.
kjc> 73, de Earl, K6SE

   Earl, CW signal MUST have clicks. Question only in it's width.
If you have clear 150 Hz width CW, you will still hear 75 Hz of
clicks after tone signal in both sides.
   Usually people forget to subtract width of receiver in their
tests. If you have +-300 Hz CW on receiver with sharp 400 Hz,
width of this CW is 300+300-400 = 200 Hz.
   Other words, width of CW signal is width of it's clicks, hearing
without tone.

Happy New Year with clear CW!

-- 
Best regards, Serge UT2IO.

PS. Sure, if you measure, you must agree with levels.