[1000mp] MkV and strong signals
Mark Marsden
[email protected]
Thu, 02 Jan 2003 10:04:07 +0000
Happy New Year Jim
Your description sounds similar to AGC effects I have on PSK when a strong =
signal (within the Rx filter passband) affects the AGC line and weaker sign=
als get attenuated.=20
One solution is to use a narrower filter centered on the weak signal, thoug=
h I prefer to switch off the AGC and set the RF gain control manually, then=
the sound-card gets a fixed dynamic range to work with.
73 Mark, G4AXX, M4R, Granta CG
www.granta.digital-crocus.com
>>> [email protected] 02/01/03 09:48:54 >>>
Happy New Year everyone!
I am having severe problems with the MkV and MMTTY on a busy band. When a
strong signal starts up many KC/s away the trace on the display drops almost
to zero and I have problems decoding the station I am listening to. All I
can hear is this off frequency station, everything else is obliterated! The
IC746 works much better so I assume I have messed up some settings. I have
tried IPO on/off and AGC off, both help but not enough.
The MkV filters fitted are as follows
8.2 MHz 250Hz and 2.0KHz both Yaesu
455KHz 250 Hz(Yaesu) , 400Hz (Inrad), 1.8Khz (Inrad)
400Hz Inrad second RX
I am using FSK with the mode set to RTTY.
SSB and CW operation seems fine ( but maybe it should be better?) How can I
check for myself how the rig is performing?
Any comments on menu set-up and filter selection would be appreciated.
Thanks
Jim MM0BQI
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]=20
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=20