[1000mp] 1000MP Clarifier Problem

Jack Richardson [email protected]
Sat, 22 Feb 2003 16:09:03 -0500


Hi Pawel!  Thanks very much for the information.  I am a new subcriber to
the 1000MP email list and have since found one other posting from several
months ago about the clarifier.  I think I'll have to buy the service
manual.  Yaesu charges $70.00 per hour to do service work!  The manual and
my time would be much cheaper.  Thanks again.

Jack/KV1E

----- Original Message -----
From: "Pawel SP7PS" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 22, 2003 3:37 PM
Subject: Re: [1000mp] 1000MP Clarifier Problem


> Jack,
> You are not alone :-) It is very popular problem of MP.
> Some people restore the clarifier, but know it is very hard work.
>
> 73's
> Pawel, SP7PS
> http://sp7ps.pl
>
> ----- Original Message -----
> From: "Jack Richardson" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, February 22, 2003 9:25 PM
> Subject: [1000mp] 1000MP Clarifier Problem
>
>
> I have a problem with my RIT and XIT on the 1000MP and suspect the
clarifier
> may be faulty.  I'm wondering if anyone else has had this problem and/or
> could offer some suggestions as to what the signal looks like coming out
of
> the clarifier control in case I need to trouble shoot.
> The problem is frequency jumps while turning the clarifier knob.  It
happens
> in both RIT and XIT and happens more frequently when tuning down
frequency.
> The rx frequency will suddenly jump positive by as much as 250Hz.  It
> happens less frequently if I turn the knob very slowly.  This sounds like
it
> could be an optical control used for the clarifier, but I don't know.  It
> does not appear to be heat-related.  Also, does anyone know a replacement
> part for the clarifier?  I don't have the tech service manual.
>
> Thanks for any help.
>
> Jack, KV1E
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>