[1000mp] AUTO TUNER

Fri, 26 Dec 2003 08:16:06 -0000

in special falls the memory from the tuner hang it up ...only on one of the
39 segments from the tuner memories.
you can reset this and this default part work now...but all memories must
now new save...

73 de bernd dl8scg
----- Original Message ----- 
From: "roofus" <[email protected]>
To: <[email protected]>
Sent: Friday, December 26, 2003 7:03 AM
Subject: [1000mp] AUTO TUNER

> This question comes from the "Strange behavior on 80 meters" thread. I
have
> been afraid to ask this because it seems like a dumb question but it's
time
> to bite the bullet and ask. This is a snip from one of the replies.
>
> Press SUB/CE and ENT together while powering up.  The will reset the tuner
> memories (and all other memories).  It will not reset the menu settings.
> You do not have to run TUNE for the antenna tuner every time you change
> bands.  It remembers tuner settings 39 times.  It is suggested that you
use
> TUNE only two times for each band -- once for the low end (CW) and once
for
> the high end (SSB).  The tuner does a good job of tracking between these
two
> memorized settings.  If you do this, you will never fill up the 39 tuner
> memories again.
> 73, de Earl, K6SE
>
> Lets say I have a beam, B&W 90' folded dipole (10-160 meters), gap
vertical
> (10-80 meters) and for kicks toss in a 80 meter loop.  I do the tune
routine
> on the B&W dipole 2 places per band X 9 bands (10-160) = 18 memories. I
than
> jump over to the vertical and need to tune it for 75 meters and while I'm
> there hear something on the low end of 20 so do a tune there. Now I go
back
> to the dipole and need to retune 75 and 20? At this rate with multiple
> antennas how long does it take to eat up 39 memories, reset and start all
> over again. From what I understand there isn't a program that will save my
> other memory settings so they all need to be re-entered again....groan.
It
> seems that with more than one antenna that a cascading type of tuner
memory
> would be better or am I really confused?
>
> Dennis, AB8NI
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp