[1000mp] CAT, Problem with Set QRG Sub-VFO

[Wladimir]

Greetings to all FT-1000-MP fans!

I wanted to make software-bandscope with the help of the second
receiver (even bought an additional narrow filter for that, hi)

The idea was as follows:
program read the frequency of the MainRX and uses it as the main
frequency for scanning SubRX. Depending on the selected width of the
controlled frequency (Width =3D W), in SubVFO frequencys from QRGmain=20
- W/2 till ORGMain + W/2 are being sent. The frequency of the first
receiver is being read again and everything repeats.. So,
bandscope is always connected to the MainRX.

Due to the experience with the other programs I expected that the=20
amplifier of the law frequency of the 2nd receiver might be closed.
Actually I don't need it, because I was gonna listen on the main.
But I was really surprised to realize, that the 1st was closed=20
togehter with the 2nd...

If I scan with the 1st one, the only 1st is being closed...=20
If they would be of the same quality, I wouldn't care much... But it's =
not the
case...

Unfortunately, syntax of the CAT-commands in TRX manual is documented =
not very
well . Maybe it's possible somehow to set the frequency (Set QRG)
the way, that the amplifier of the law frequency wouldn't get
closed... Maybe there is one bit responsible for that...

I have used commands  F1 F2 F3 F4 0Ah for the main-VFO and=20
F1 F2 F3 F4 8Ah for the Sub-VFO.=20
Does anybody know how to solve this problem?

Or it's only possible to cut the wire, by which close signal for LF
amplifier is transmitted? Hmm...

Program is available under: http://www.qsl.net/dl1kbx/scan-kbx.htm
 =20



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---