[1000mp] MP receive problem

Thu, 16 May 2002 08:10:23 +0200

Surly a problem of relay...

Same story on my MP, finaly I just invert the antenna connection A and B and
reset accordingly 
all the band with the correct antenna and... no more problem!

Not a real professional way of solving problem but a real cheap one! :-)

73's

Ferdy [HB9DSP]
www.gtoevolution.ch/hb9dsp

> -----Original Message-----
> From:	Phil Duff [SMTP:[email protected]]
> Sent:	mercredi, 15. mai 2002 18:20
> To:	[email protected]
> Subject:	[1000mp] MP receive problem
> 
> My 1000MP has developed an apparent 40m receive problem.
> 
> When selecting 40m the received band noise & signals are barely audible
> for 
> a short time (varies but usually 1-2 minutes) before the receiver seems to
> 
> recover.   Selecting an antenna on ANT RX (external receive ant. port)
> results in normal receive levels.   A separate receiver was used to 
> determine that the 40m antenna is OK.
> 
> This all seems to point to a problem in the MP's LPF or HPF 
> boards.   Anyone have any experience with a similar
> problem?   If so, is it something that I could fix or will it require a 
> trip to a Yaesu repair shop?
> 
> 73 Phil NA4M
> 
> 
> -. .- ....- --   -. .- ....- --   -. .- ....- --   -. .- ....- --   -. .- 
> ....- --
> Phil Duff NA4M     [email protected]   Georgetown, Texas  
> 
> 
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp