[1000mp] INTERMITTENT RECEIVER FAILURE - FT1000MP

Sun, 10 Mar 2002 00:36:55 -0000

Steve:

You did not mention what settings on EDSP when this event occurred. I have
noted loss of functionality upon occasion when the noise reduction (outer
ring of the EDSP control) was set full CW.

Garry, NI6T

>
> Has anyone experienced a total lack of receive signal with the
> 1000MP, as this happened to me on two occasions in the recent
> ARRL SSB Contest. It only occurs when the EDSP filtering is in
> use, and switching off the rig for a few seconds then back on
> brings it back to "life". This would appear to indicate some
> sort of "poor connection" or w.h.y., but where and what exactly?
>
> The receiver works fine with the EDSP "off", but the failure
> happened on at least two occasions with the EDSP "on".
> Switching bands had no affect, the only way to clear the fault
> was to hit the on/off button.
>
> Anyone know if this has been documented anywhere?
>
>
> Steve
> GW4BLE
>
> Contest Cambria - GW7X (http://www.gw7x.org)
>
>
> 01442 297738
> 07710 055612
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>