[1000mp] cw tuning indicator

Sun, 3 Mar 2002 00:12:25 -0500

The default value for the indicator is 700 Hz. If you have adjusted your CW
pitch to something else, you must adjust the pot under the little trap door
on top of the rig. If your pitch is 700 hz and it doesn't light when you are
offset at 700, you need to adjust the pot as well.

Procedure is to turn on the "spot" tone, then SLOWLY adjust the pot (see
manual to see which one to turn -- I think it's labeled "cw" on the board)
until the indicator light illuminates.

73 and good luck!

Steve W3SY

----- Original Message -----
From: "Santa Fe" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 02, 2002 4:35 PM
Subject: [1000mp] cw tuning indicator

> The Cw tuning indicator (that indicates zerobeat) on my MP never ever
> illuminates.  Is there a menu item, perhaps, that turns this on and off?
Or
> some internal adjustment that puts it on frequency?
>
> 73,
>
> Fred
> kt5x
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp