[1000mp] Spurious Oscillaton of PA
Graeme Jackson
[email protected]
Tue, 11 Jun 2002 11:39:09 +0100
I have been in contact with another Ham over a problem that we both =
seemed to have. He is a FT1000MPMK5 owner, and I am the owner of a =
recently purchased second hand FT1000MPDC. We both have the problem =
that the PA takes off on 15 and 17mtrs with our station setups. I have =
cured my problem by having a word with Yaesu UK, they sent me a =
modification kit comprising of 2 small toroidal coils and a strip of =
sticky back copper tape. The mod consisted of changing 2 air cored =
coils on the bandpass filter board with the toroids, and making sure =
that the PA compartment made good earth bond to the side of the rig =
chassis using the copper tape ( note, on my rig there was tape already =
in place but the corners were doubled over making the bonding worse ---- =
scratch off the corners and clean the bonding areas ! ). Also extra =
earth bonding of small screens on the PSU filter and bandpass filter =
boards by way of soldered 6mm earth braid. The paperwork for the mod =
appeared to originate in the USA, and was titled --- Antenna wont tune =
on 15mtr band.
For anyone out there with similar problems I hope this proves of =
interest !
Yaesu UK said as an initial possible quick fix, try winding a 2 inch / =
50mm diameter 6 turn coil in the coax lead to the antenna terminal on =
the rear ( external ) of the rig ---- alas this did not work for me !
73 / 72 Graeme G4CKH. [email protected]
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---