[1000mp] Fw: [Yaesu] A possible problem with FT1000MP

[Juha Rantanen]

I already sent this to Yaesu mailing list but 1first two repliers said that
I should turn into you folks. Few definitions: I did set up the new filters
in the menu system and I don't think this has anything to do with the new
filters as I also noticed the difference mentioned below with 2,4kHz wide
filter.

Juha OH6XX

> Hi all
>
> I installed Inrad CW filters yesterday to my MP and noticed something that
I
> haven't noticed before. I don't think that the filters have anything to do
> with it but I noticed that signal levels on my main-RX are quite about 2
> S-units down from the sub-RX. I tuned around 7040kHz and found some stable
> noice source and when I listened the signal on main-RX and immediately
> switched to sub-rx the signal level was clearly down on main-rx. The
signal
> levels are concluded from the two S-meters MP has, of course they might
not
> be calibrated with each other but anyway the situation seemed to be like
> this also by ear. Has anyone noticed anything similar or is my radio
broken.
>
> Juha OH6XX
>
> P.S. Yes, I had the same filter bandwith on both receivers and all the
> buttons seemed to be like should be.