[1000mp] MMtty/rigblaster/mp1000

[Richard Thorne]

Paul:

Have you tried hooking the rig blaster to one of your serial ports?  Tell
mmtty which comport your using.  If you set it up correctly, the rig blaster
will then key your mic ptt and solve the problem.


Paul & Tracy wrote:

> Hello MP Gurus,
>
> In the process of  getting a modest station back together after a near 2
> year absence from radio.
>
> Have downloaded MMTTY and I am trying to get it operational in conjunction
> with my rigblaster, MP1000 and Windows 98.
>
> MMTTY is receiving rtty ok but on TX I am not getting automatic keying of
> the rig. MP1000 vox is set up ok and I have tried with the rigblaster set
> to both vox (as recommended) and auto. If I press mox
> the rtty is transmittted ok but this is obviously not as convenient as
> automatic keying. I am sure I had this working before packing up my
> equipment some time ago but just can't figure it out now. Would appreciate
> if someone using this exact set-up can give me a full rundown on how they
> have done it. (Tx connection is stereocable from computer speaker out to
> rigblaster audio in).
>
> Hope to see you all on air soon - albeit with a much reduced signal as
> compared to the vk3ajj antenna farm of some years ago.
>
> Paul (vk3ajj)
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> 1000mp@mailman.qth.net
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp

--
Richard Thorne
Advo Companies, Inc.
806-342-0600