[1000mp] MarkV AF output for digital modes

[Steve Holton]

At 10:39 2/24/2002 -0800, you wrote:
>Thanks for the response, Steve.
>
>So the AF Out connector will combine main and sub on a single channel if
>menu 4-8 is set to "Mono"? Are you using the AF Out connector's "tip" or
>"ring" as you soundcard input?

I wasn't clear enough:  I use a stereo cable from AF-Out to the soundcard's 
line-in - which is also a stereo input and select the channel L, R or Mono 
on the MMTTY configuration. I think you can also set balance on the volume 
controls.
I have the line balance set to the middle ie mono position.
I don't believe that the 4-8, 4-9 controls affect the AF out. I think it's 
constant level  main and sub on separate channels the only control I think 
is enable of the RX on each receiver.


>In working a pileup, it's best to disable the sub-receiver whenever
>you're listening for a response from the DX, or when the DX has come
>back to you and you're confirming the QSO. You can do this by stabbing
>at the front panel sub-receiver RX button, or via transceiver control
>software.

Sometimes the finger/mind/eye coordination isn't as good as it used to be - 
HI HI
So on RTTY I can at least have the system help me....


>     73,
>
>         Dave, AA6YQ