[1000mp] Low Xvtr Output

[crll]

Hi Bob,

This is the 'normal' output of the Mp and MkV. I have the DEM trv and they
have an input amp option which was 'made' for use with the MP's. You will
probably have to get / make the same for the SSB unit. The Mp with trv is
well worth the effort so don't give up!!


Jason
ve7ag
-----Original Message-----
From: Bob Kocisko <k6pf@ix.netcom.com>
To: FT-1000MP Mailing List Postings <1000mp@mailman.qth.net>
Date: Tuesday, February 05, 2002 8:44 PM
Subject: [1000mp] Low Xvtr Output


>Hello,
>
>I recently purchased a used FT-1000MP primarily for use as a 28MHz IF with
>VHF & UHF xvtrs.  The 28MHz power output at the xvtr port measures
>about -20dBM.  My SSB xvtrs would like to see between
>-10dBM & 0dBM of drive.  Does anyone on this reflector know how to modify
>the 1000MP to get an additional 10 to 20dB of gain?  One of the reasons I
>purchased the MP is because of the separate Rx antenna & xvtr output ports
&
>the switch to turn off the PA stages. I was aware of this low drive level
>when I purchased it.
>
>Tnx in advance for any help.
>
>73,
>Bob, K6PF
>
>
>_______________________________________________
>1000mp mailing list
>1000mp@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/1000mp
>